Release Log
Add usb power pin configuration.
Xtron Pro will not go to sleep when connected to the USB cable, in order to enter sleep mode after disconnection, we have added USB power signal detection.
How to set the program to enter sleep, please refer to this blog.
How To Upgrade
First, download the newest Bootloader firmware.
Or download from product download page, click here.
Second, connect your Xtron Pro to your computer with the USB-C cable, and enter it to Bootloader mode.
Third, drag the downloaded bootloader firmware to the XTRON drive, which is the same as the method of downloading game firmware.
At last, your have the newest Bootloader, then reset to Bootloader and reload your program.
Comments
JWrgMPJVZ0YC5KtLtZ6JOXbKv74iB_
How do I enter Bootloader mode?
Any chance of a tutorial for this?
Justin Xue
Hi, click the Reset Button of Xtron Pro will switch the Bootloader and the Game interface.
JWrgMPJVZ0YC5KtLtZ6JOXbKv74iB_
I must be missing something because pressing the Reset Button just takes me back to the previous screen, which was a game.
These are the steps I have followed:
1. Plug in USB (Xtron pro is on main opening screen)
2. Press the reset button (takes me back to a game)
What am I missing?
Thanks
JWrgMPJVZ0YC5KtLtZ6JOXbKv74iB_
I must be missing something because pressing the Reset Button just takes me back to the previous screen, which was a game.
These are the steps I have followed:
1. Plug in USB (Xtron pro is on main opening screen)
2. Press the reset button (takes me back to a game)
What am I missing?
Thanks
By the way, when I post here I always get an error
Justin Xue
Hi,
We have found the issue, and fixed it. Thank you for your feedback.
Yeah, the main opening screen is the bootloader interface.
Best